Forskjell mellom versjoner av «Verktøylås»

Fra Bitraf
Hopp til navigering Hopp til søk
(lagt til kategori Prosjekter)
 
(3 mellomliggende revisjoner av en annen bruker er ikke vist)
Linje 1: Linje 1:
esp wifi relay
 
  
for å programmere med arduino: http://www.instructables.com/id/Quick-Start-to-Nodemcu-ESP8266-on-Arduino-IDE/
+
We are using a Wifi enabled Relay to experiment with access control named Yunshan Wifi relay.
 +
 
 +
To add an extra board in the Arduino IDE, these intructions were useful: http://www.instructables.com/id/Quick-Start-to-Nodemcu-ESP8266-on-Arduino-IDE/
 +
 
 +
Very useful web page with information: https://ucexperiment.wordpress.com/2016/12/18/yunshan-esp8266-250v-15a-acdc-network-wifi-relay-module/
 +
 
 +
We first tested with a blinkled example. The Blue LED on the ESP8826 is pin 2.
 +
 
 +
Then we modified the example to work with MQTT and put the resulting code in the repository "machine access": https://github.com/bitraf/machineaccess
 +
 
 +
[[Category:Prosjekter]]

Nåværende revisjon fra 9. aug. 2018 kl. 13:54

We are using a Wifi enabled Relay to experiment with access control named Yunshan Wifi relay.

To add an extra board in the Arduino IDE, these intructions were useful: http://www.instructables.com/id/Quick-Start-to-Nodemcu-ESP8266-on-Arduino-IDE/

Very useful web page with information: https://ucexperiment.wordpress.com/2016/12/18/yunshan-esp8266-250v-15a-acdc-network-wifi-relay-module/

We first tested with a blinkled example. The Blue LED on the ESP8826 is pin 2.

Then we modified the example to work with MQTT and put the resulting code in the repository "machine access": https://github.com/bitraf/machineaccess